Operation Manual

MOVING OR RELOCATING YOUR LESLIE SPEAKER

So as not to damage your Leslie cables, carefully unplug both ends of the cable before moving your Leslie

speaker. To prevent damage to the cabinet, it is advisable that more than one person move the speaker.

PACKING AND SHIPPING

Packing and shipping should be done by your local Leslie dealer or by a qualified mover. The speaker should

not be moved or carried on its side or upside down, as this will result in damage to the moving parts inside the

cabinet. The cabinet must be moved, carried or shipped in an upright position. The exterior should be

protected by boxing the cabinet or covering it with padding.

SPECIFICATIONS:

Leslie models 122A, 122XB, 147A

- Single-Channel Input

- Amplifier: 40Watt RMS Vacuum tube amplifier

- Two speed horn and drum rotor

- Inputs: Model 122A, 147A – 6-pin Leslie connector

Model 122XB- 11-pin Leslie connector, 1/4” Line Input jack and 1/4” foot switch jack

- Controls: Model 122A – Master Volume control

Model 147A – Master Volume control, Input Selector switch

Model 122XB – Master Volume control, AC power switch

- Speakers: Massive 15” woofer, world-famous Ferro Fluid horn driver

- Dimensions: 41 5/8” H, 29 1/4” W, 20 5/8” D

- Weight: 149 lbs

OPTIONAL ACCESSORIES

Shown below are only a few of the available optional accessories for your new Leslie Speaker. Visit our

website or your local Leslie dealer to view all the available products to enhance your Leslie Speaker.

Model FS-10TL Foot Switch

Enable the selection

of speeds on the 122XB

Leslie. Supplied with a 16’

cord with a 1/4” plug.

Tremolo / Chorale Switch

This half-moon shaped

switch assembly is used to

control the speeds of the

Leslie speaker. Consult

your dealer for the switch

that your organ or Leslie requires.

6-pin and 11-pin Leslie cable assemblies

These cable assemblies

are available in 30’, 50’

and 100’ lengths.

Leslie Power Relay

This adapter will

allow you to

connect additional

Leslie speakers to

your organ.