Operation Manual

17
*6
VALUE
DOWN UP
The above data can be stored to a Preset. Please see page 24 for information on how to save Presets.
Rise Time
Fast Speed
Slow Speed
[Control Ch]
[Prog. Ch]
[Mod Rx]
[Exp Rx]
[S/F Type]
[P.F.SW Type]
[Dump Out]
[S/F Cont.Code]
Cross Over Freq./ Cabi. Resonance
Fall Time
Brake Time
Rotor Direction /Mic Angle
Character /Mic DistanceHorn
HORN
ROTOR
LOW
ROTOR
FUNCTI ON
SELECT
Touch & Hold
[ ]
MIDI
HORN
ROTOR
LOW
ROTOR
FUNCTI ON
SELECT
Touch & Hold
Ë Microphone Angle and Distance
When a Leslie Speaker cabinet or cabinets are used in a large facility such as an auditorium or outdoor
arena, the Leslie(s) are frequently “miked” to insure that the sound carries adequately. Sound
technicians have discovered that the placement of the microphones greatly affects the character of the
sound heard by the audience from the Leslie Speaker(s) (see the diagram below).
This Advanced Feature allows you to simulate various microphone distances and angles facing the Low
Rotor.
TRY THIS:
1. Touch the FUNCTION SELECT switch to select LOW
ROTOR. The green LED will light.
2. Select Mic
Angle or Mic Distance using the Function
Selector.
3. Use the VALUE Rotary Knob to select the value you want.
The data chart below shows the options that you may select.
MICROPHONE SETTINGS
Option Parameter Limits
Angle 0 ~ 180
"
Distance 0.3m ~ 2.7m
NOTE: Both these are subtle effects and may require careful listening to detect the differences among the
various settings.