Operation Manual

M I D I
109
HA<O> ORGAN New B-3 / New C-3 Owner’s Playing Guide
3. Touch the Number 1 Select Touch Button to select the EX.ZONE Menu:
Notice that the word ON is flashing “on” and “off.”
4. Touch the PARAM “ X” Select Touch Button six
times. The Information Center
Display should now look similar to this:
Notice that the legend just underneath the word OCT is flashing “on” and “off.”
5. Now select the Octave setting for each Part by doing the following:
Use the PAGE Select Touch Buttons to make your Manual, Pedal and Part
selections (“SWELL 1,” “SWELL 2,” “SWELL 3,” “GREAT 1,” “GREAT 2,”
“GREAT 3” or “PEDAL 1,” “PEDAL 2” and “PEDAL 3”).
Use the VALUE “-” Select Touch Button to lower
the Octave setting for the
selected Part.
Use the VALUE “+” Select Touch Button to raise
the Octave setting for the
selected Part.
The data chart below shows the options that you may select.
EX.ZONE OCTAVE - All Parts
-2 (two octaves lower) ~ 0 ~ +2 (two octaves higher)
NOTE: You can exit by touching the MENU / EXIT Select Touch Button.