Datasheet

4/2/2019 Water-Tight ABS & Polycarbonate Enclosures (RZ Series) - Hammond Mfg.
https://www.hammfg.com/electronics/small-case/plastic/rz 1/2
Beige ABS plastic Beige ABS plastic
with clear
polycarbonate lid
Light gray
polycarbonate
Light gray
polycabonate with
clear polycarbonate
lid
Enclosure is
assembled with
stainless steel
screws into stainless
steel inserts. Wall
Mounting holes are
outside the gaskets
perimeter.
Internal mounting
points designed for
printed circuit boards
or DIN rail
Water-Tight ABS & Polycarbonate Enclosures RZ Series
Opaque or Clear Lid, Smooth Surface
Key Features
Designed to meet IP65.
Ideally suited for mounting printed circuit boards or DIN rail mounted components
Gasketed lid with two-piece tongue & groove construction provides protection against
access of oil, dist, and water
Lid screws are self-captivating (lid holes are threaded with first installation of screws.)
All sizes are available with clear polycarbonate lid (part numbers ending in "C")
Easy to wall-mount using "through box-blind hole construction" whereby the wall-
mounting holes are outside the gasket perimeter.
ABS Plastic Specifications
Suggested for indoor use
UL Flammability rating of UL-94HB
Color: RAL1013
Temperature: -30 degrees C to +80 degrees C.
Polycarbonate Specifications
Suggested for outdoor use
UL Flammability rating of UL-94HB
Color: RAL7035
Temperature: -40 degrees C to +130 degrees C.
Available In Four Styles
Quality Products. Service Excellence.