Operation Manual
111
MIDI
TEMPORARY DUMP CONTENTS
The patch parameters, global parameters and
system parameters of the Temporary (= the
present setting values) are transmitted.
The contents of each patch or that of the Leslie
Cabinet are not transmitted. Use ‘All Dump’ or a
USB ash drive for saving them.
TO SAVE ALL
All the setting values of this organ are transmit-
ted by ‘All Dump’, but the contents of the Extra
Voice section sound library are not transmitted,
because the data are enormous large.
Use the USB ash drive to save all settings in-
cluding the sound library.
the receiving is neglected, when the Device ID does not match,
even if the messages are the same.
❿ RECEIVE DUMP
is switches whether to receive the Memory Dump or not
ON/OFF.
On this keyboard the total onboard memory can be transmit-
ted as a Memory Dump, as system exclusive messages. If you
do not want the contents of this keyboard be changed by se-
quencer play, set this to OFF.
When ON, transmitted. When OFF, not transmitted.
⓫ TEMPORARY DUMP
Sends the Memory Dump.
When you press the [ENTER] button in this mode, the Tem-
porary (the present settings) are sent as a whole from the MIDI
OUT jack.
If you record the Temporary by doing this before you record
your performance to the external sequencer, you can avoid the
setting mismatching when you play it back later.
⓬ ALL DUMP
Sends the Memory Dump.
If you press the [ENTER] button in this mode, all the settings
except the sound library contents are sent out of the MIDI
OUT jack.
uKEYBOARD CHANNELS
Sets the MIDI channel to transmit at each part. e setting
range is 1 to 16 and OF. At OF there is no transmission.
⓭ TX UPPER
Sets the MIDI channel for sending the UPPER part playing
information, the control information of this organ and that of
the Leslie speaker.
⓮ TX LOWER
Sets the MIDI channel for sending the LOWER part playing
information.
⓯ TX PEDAL
Sets the MIDI channel for sending the PEDAL part playing
information.
⓰ RX UPPER
Sets the MIDI channel for receiving the UPPER part playing
information, the control information of this organ and that of
the Leslie speaker.
⓱ RX LOWER
Sets the MIDI channel for receiving the LOWER part playing
information.
⓲ RX PEDAL
Sets the MIDI channel for receiving the PEDAL part playing
information.
v To avoid confusion of MIDI signals, set each MIDI
channel including the external zones (P. 108) to dier-
ent numbers.
NOTE: The settings in this mode are not recorded to the patches.
They are recorded upon setting, and are common at all patch-
es.
⓫ ⓬