Operation Manual

115
Save the Setup
PHONES
USB
FLASH DRIVE
INITIALIZE THE USB FLASH DRIVE
A “fresh” e USB flash drive must be “initialized”. e initializing procedure is as
follows:
v When initializing is completed, all the contents of the USB ash drive
are erased.
Insert the USB flash drive to the USB MEMORY jack.
Wait until the display “Confirming USB. Please
wait...” disappears.
Press the [MENU/EXIT] button to display the Menu.
Select Page E with the [],[] buttons.
Press the [ENTER] button.
e FORMAT (=initializing) mode is displayed.
Press the [ENTER] button.
Confirmation message is displayed.
Press the [ENTER] button.
Initialization starts. It takes about 3 seconds.
NOTE: If you choose to not initialize, just press the [MENU/EXIT] but-
ton.
To return to the play mode, press the [PLAY] button.
Select the “FORMAT” with the [] button.
UPPER
PEDAL
LOWER
NUMBER NAME
PATCH
ENTER
VALUE
MENU/
EXIT
PLAY
UPPER
PEDAL
LOWER
NUMBER NAME
PATCH
ENTER
VALUE
MENU/
EXIT
PLAY
UPPER
PEDAL
LOWER
NUMBER NAME
PATCH
ENTER
VALUE
MENU/
EXIT
PLAY
UPPER
PEDAL
LOWER
NUMBER NAME
PATCH
ENTER
VALUE
MENU/
EXIT
PLAY
UPPER
PEDAL
LOWER
NUMBER NAME
PATCH
ENTER
VALUE
MENU/
EXIT
PLAY
UPPER
PEDAL
LOWER
NUMBER NAME
PATCH
ENTER
VALUE
MENU/
EXIT
PLAY
1
2
3
5
6
7
8
4