Operation Manual

81
Setting the Parameters
uDISPLAY
㉑ DISPLAY - SHORT CUT (G)
Sets the short cut waiting time.
e setting range is 0 to 2 seconds. At NO the short cut feature is disabled.
㉒ DISPLAY - TIME OUT (G)
Sets the time for returning to the previous mode from the mode displayed by the short
cut operation.
e setting range is 4 to 16 seconds. At NO the screen will not return to the previous
mode.
㉓ DISPLAY - POP UP (G)
Sets the interval at which the Pop Up is displayed when you move the [OVERDRIVE]
or [EFFECT AMOUNT] knob.
e setting range is 0.5 to 2 seconds. At NO no Pop Up is displayed.
NOTE: The parameter with (P) indicated is
a patch parameter, and is recorded
to each patch. (G) indicates “global
parameter”, which is recorded upon
being set, and is common with each
patch.