Operation Manual
HA<O>
Sk1
/
Sk2
Owner’s Manual
114
SAVE YOUR SETUP
A USB memory connector is built in on this instrument. You can save the setting of
each Parameter as a file to it. e USB memory can be used for the music player or
as a sound library.
WHAT YOU CAN DO WITH THE USB FLASH
DRIVE
w Saving / Restoring the set-ups of this keyboard. Unlike the memory dump, it is
possible to save all data including the sound library.
w If you use the music player to playback audio data of WAVs (44.1 kHz 16 bit)
and MP3 (44.1 kHz, 128 kbps), you can enjoy playing the keyboard with the
accompaniment of the audio data.
w Load the exclusive sound library.
w the capacity of 1 file is 32K bytes (only set-ups), the maximum including the
sound library is 32M bytes.
w 1 USB flash drive can save up to 99 set-up files.
ABOUT USB FLASH DRIVE
USABLE USB FLASH DRIVE
Consult our web site about compatible USB flash drives.
in Europe: http://www.hammond.eu
in The US: http://www.hammondorganco.com
USB MEMORY CONNECTOR
1. Insert the USB flash drive into the correct direction, matching the upper side of
it to that of this keyboard.
2. Do not remove the USB flash drive nor switch OFF the power while the access
(= while the “Please wait.” is displayed). e data may be damaged.
FOLDER STRUCTURE
When the USB flash drive is inserted to this organ, the following folders are auto-
matically created on the drive.
1. “HAMMOND” - “SK” to the route.
2. “SETUP”, “AUDIO”, “LIBRARY”, “SYSTEM” below it
SETUP
The setup le is saved here.
AUDIO
Place the audio le to playback with the music player.
LIB
Place the exclusive library le here.
SYSTEM
Place the system le to update this keyboard here.
NOTE: If it is dierent format type that SK can used, SK initializes the USB ash drive by its
own format type automatically.
PHONES
USB
FLASH DRIVE
EXTENSION OF THE SETUP FILE
The extension “SET” is automatically given to the
setup le treated on this keyboard.