Operation Manual

HA<O>
Sk1
/
Sk2
Owner’s Manual
116
SETUP PROCEDURES
Save or Load the SET-UPS to/from the USB flash drive in the SETUP mode.
To locate this mode:
HOW TO READ THE DISPLAY
SAVE THE SETUP
Check that the USB flash drive is correctly inserted.
Locate the SETUP mode.
WHAT DOES THIS MEAN?
USB is not ready.
USB flash drive is not correctly inserted.
Select the “New File” by pressing the [] button (or turning
the [VALUE] knob) a few times.
If you want to save the sound library, too, press the [] button
to display the “TYPE” and change the value from “SETUP” to
“WHOLE” with the [VALUE] knob. en press the [] but-
ton and return to the file display mode.
If you press the [ENTER] button, it is saved. With the
WHOLE file, it can take up to 3 hours maximum for saving.
A temporary name “SETUPxx” is automatically given to the
saved setup file.
UPPER
PEDAL
LOWER
NUMBER NAME
PATCH
ENTER
VALUE
MENU/
EXIT
PLAY
UPPER
PEDAL
LOWER
NUMBER NAME
PATCH
ENTER
VALUE
MENU/
EXIT
PLAY
UPPER
PEDAL
LOWER
NUMBER NAME
PATCH
ENTER
VALUE
MENU/
EXIT
PLAY
MENU/
EXIT
ENTER
SETUP name
This indicates there is another
SETUP le above (or below).
Type of File
SU: only the Setup
WH: includes Library
What your are going to operate
This indicates there is another
page on the right (or on the left).
1
2
3
4
5
6