Operation Manual
17
Hook-Up
CONNECTING THE LESLIE SPEAKER
An 8-pin type Leslie speaker can be directly connected to this keyboard.
v Switch keyboard OFF before connecting the Leslie speaker.
BASIC CONNECTION OF THE LESLIE SPEAKER
Connect the Leslie Speaker #2101, or #2101mk2 and the Leslie 8-PIN jack on this key-
board with the exclusive 8-pin Leslie cable (optional LC-8-7M, not included).
NOTE: The Leslie terminal on this unit is of 8-pin specications. It is impossible to directly con-
nect a 11-pin spec. Leslie speaker.
1. Make the setting of Tone-Wheel organ.
2. Switch “ON” the [BYPASS] button, set the [STATIONARY VOLUME] of the
#2101/mk2 at desired volume.
3. Repeat “ON/OFF” the [BYPASS] button with playing the keyboard, set the [RO-
TARY VOLUME] of the #2101/mk2 at same volume which you can hear.
MIDI CONTROL OF THE LESLIE SPEAKER
To control the parameters of the Leslie Speaker #2101, #2101mk2 (fine adjustment of
the rotor speed or the rise time, etc.):
1. Connect the MIDI OUT of this unit with the MIDI IN of the Leslie speaker with a
MIDI cable.
2. Set the keyboard channel - UPPER and the Leslie MIDI channel to the same chan-
nel. (P. 111)
When this unit detects that the Leslie speaker is connected, the Leslie parameters sent
through MIDI from this unit are switched from the SK original to those for the Leslie
speaker.
PHONES
USB MEMORY
LESLIE SPEAKERS TO BE CONNECTED
This keyboard is designed to connect with 3
channel Leslie speakers such as #2101. How-
ever, it is also possible to connect 1 channel
type Leslie speakers such as #3300 sending
the stationary channels to the LINE OUT jacks
independently. (P. 86)
LESLIE CHANNEL
3 channel type Leslie speakers are equipped
with a stereo speaker system, independent of
the rotor, to provide stereo sound for the Extra
Voices and direct organ sounds.
A traditional 1-channel Leslie, such as a #122
or #147 has no stationary speaker system, thus
requiring a separate amplier/speaker for the
Extra Voices or direct organ sounds.
8-pin Leslie Cable
MIDI Cable (Optional)