Operation Manual

71
Using the Control Panel
5
MOVE THE CURSOR TO THE PARAMETER YOU WANT TO CHANGE
Decay time is on the “DECAY” page.
Locate the “DECAY” page using the
[][] buttons.
“FAST” is on the right side of the page
move the cursor (blinking value) to the
right using the [][] buttons.
6
CHANGE THE VALUE
Decrease the value using the [VALUE]
knob.
NOTE: If you want to change other items,
repeat the process 1 to 6.
8
RECORD TO THE PATCH IF NECESSARY
e parameter “DECAY FAST” is a patch parameter, so, if you call another (or
same) patch, it is changed to the newly set value.
If you need the changed value hereafter, you must record it to a patch.
PATCH PARAMETERS
Patch Parameters are unique to the current
patch, and change with the programming of
each patch. Many of the knobs/buttons on the
top panel are “Patch Parameters”
The Parameters common to all the patches
are called “Global Parameter”, on the contrary.
7
RETURN TO THE PLAY MODE
Press the [PLAY] button. e display
returns to the PLAY mode.
UPPER
PEDAL
LOWER
NUMBER NAME
PATCH
ENTER
VALUE
MENU/
EXIT
PLAY
DRAWBARS SELECT
ORGAN TYPE
Bourdon
16'
OpenDiap
8'
Gedeckt
8'
VoixClst
II
Mixture
III
Octave
4'
Flute Dolce
4'
Hautbois
8'
Flute
2'
UPPER
PEDAL
LOWER
NUMBER NAME
PATCH
ENTER
VALUE
MENU/
EXIT
PLAY
UPPER
PEDAL
LOWER
NUMBER NAME
PATCH
ENTER
VALUE
MENU/
EXIT
PLAY
UPPER
PEDAL
LOWER
NUMBER NAME
PATCH
ENTER
VALUE
MENU/
EXIT
PLAY