Operation Manual

HA<O>
Sk1
/
Sk2
Owner’s Manual
86
uEXTERNAL LESLIE SPEAKER
⓴ LESLIE CHANNELS
Sets the channel for the Leslie speaker connected to the LESLIE 8-PIN jack.
1ch: For connecting a 1 channel Leslie cabinet such as the 122XB, 3300/W (non-expansion).
The Drawbar and the percussion sounds are output only from the rotary channel, the
other voices are from the LINE OUT jack.
3ch: This is for connecting a 3 channel Leslie cabinet such as the 2101/mk2, 3300/W (stationary
expanded). The Drawbar and the percussion sounds are output from the rotary channel,
the Extra Voices are from the stationary channel of the Main and Aux.
NOTE: This is a system parameter. It is recorded upon setting, and is common with all patch-
es.
RECORD THE CABINET
Record the Leslie Parameter (#2 to #19 on the previous page) to
the Cabinet Numbers and use them selecting at the patches.
1
Give a name to the cabinet as desired.
2
Press the [RECORD] button in the Leslie Parameter
setting mode (#2 to #19).
e Cabinet Select mode is displayed.
3
Select the Cabinet Number to record with the [VALUE] knob.
4
Recording is made upon pressing the [ENTER].
e display is as the above during the treatment.
NOTE: If you don’t wish to record, touch the [MENU/EXIT] button.
LESLIE - continued
UPPER
PEDAL
LOWER
NUMBER NAME
PATCH
ENTER
VALUE
MENU/
EXIT
PLAY
DRAWBARS SELECT
ORGAN TYPE
Bourdon
16'
OpenDiap
8'
Gedeckt
8'
VoixClst
II
Mixture
III
Octave
4'
Flute Dolce
4'
Hautbois
8'
Flute
2'
UPPER
PEDAL
LOWER
NUMBER NAME
PATCH
ENTER
VALUE
MENU/
EXIT
PLAY
UPPER
PEDAL
LOWER
NUMBER NAME
PATCH
ENTER
VALUE
MENU/
EXIT
PLAY