Operation Manual

97
Setting the Parameters
REVERB
In this mode, you set the Reverb effect.
Reverb is common with the Organ and Extra Voice sections, the single reverb control
section affects both.
To locate this mode:
❶ DEPTH
is sets the depth (volume) of the Reverb Effect.
e setting range is 0 to 127. is parameter is linked with the [REVERB DEPTH]
knob on the top panel.
❷ TYPE
is sets the types of Reverb Effect.
Room 1: Small room
Room 2: Large room
Live: Ambient room
Hall 1: Large Hall
Hall 2: Small Hall
Church: Church
Plate: Iron-plate Reverb
Spring: Spring Reverb
Delay: Delay
PanDly: Panning Delay
RevDly: Reverb + Delay
❸ REVERB TIME
When the Type (#2) is set at Room 1 to Spring, e decay of the Reverb is attenuated.
e setting range is 0 to 127. e decay becomes greater as the value is increased.
❹ DELAY TIME
When the Type (#2) is set at Delay, PanDly, RevDly, this sets the delay time.
e setting range is 4.7 to 2000ms. e delay becomes longer as the number value is
increased.
NOTE: You can set the delay time with the foot switch. (P. 78 #2)
❺ DELAY FEEDBACK
When the Type (#2) is at Delay, PanDly, RevDly, it sets the amount of Feedback (How
many times the sound repeats.)
e setting range is 0 to 96%. e repetition becomes greater as the value is increased.
NOTE: Type (#2) is a micro-parameter. When you change the type, each reverb parameter (ex-
cept #1) is automatically set to the recommend value.
or, keep pressing the [REVERB ON] button for a few seconds.
See “Function mode” (P. 68) for operation details.
MENU/
EXIT
ENTER
NOTE: All the parameters in these modes
are Patch Parameters. They are re-
corded into the Patch.
❶ ❷ ❸ ❹ ❺