User Manual

101
Setting the Parameters
DEFAULT
In this mode, you can go back totally or partially to the factory default settings.
To locate this mode:
To initialize each parameter, select the parameter you want to initialize with the [][]
button and press the [ENTER] button.
❶ MANUAL
 is is for initializing the contents of the [MANUAL] button.
Used to create a “clean slate” for new Patch settings.
❷ PATCH
 is is for initializing the User Patch contents (copy the contents of a Preset Patch into
User Patch of the same number).
Select the Patch you want to initialize with the [VALUE] knob.  e selecting range is
U001 to U100 and ALL (All user Patches).
❸ GLOBAL
 is is for initializing the Global Parameters such as the Master Tune or assignment of
the Foot Switch.
❹ LESLIE
 is is for initializing the contents of all internal Leslie cabinets. Select the cabinet you
want to initialize with the [VALUE] knob.  e selecting range is U1 to U8 and ALL (All
User cabinets).
❺ CUSTOM TONE-WHEELS
 is is for initializing the contents of all custom Tone Wheels.
❻ PIPE
 is is for initializing the Pipe parameters.
❼ LIBRARY
 is is for deleting all the tone library contents and rewriting to the default contents.
❽ ALL
 is is for defaulting all parameters of the SKX.
If any unstable condition occurs on the SKX system, defaulting “all” will usually clear
the problem.
NOTE: You can also totally initialize your keyboard by switching the power ON while pressing
and holding the [RECORD] button.
MENU/
EXIT
ENTER
❶
❶
❷
❷
❸
❸
❹
❹
❼
❼
❽
❽
❺
❺
❻
❻