User Manual

111
MIDI
󱀙 NOTE - PAN
Sets the Pan of the selected Zone (Control Change #10).
 e setting range is L64(Left) - C(Center) - R63(Right).
󱀚 NOTE - VELOCITY
Sets the character of the velocity to send to the selected Zone.
 e setting range is OF and 1 to 4. At OF, the velocity is  xed
at 100.  e “touch” (velocity response) of the keyboard pro-
gresses from 1 (heavier) through 4 (lighter).
󱀛 EXPRESSION - MINIMUM
󱀜 EXPRESSION - MAXIMUM
Sets the range to “compress” the Expression information to
send to the selected Zone.
On the electronic organ, even if the Expression pedal is fully
returned, sound does not perfectly silenced. If a GM sound
generator is used, no sound comes out.  is is a parameter to
balance it.
 e setting range is MIN at 0 to 63, MAX at 64 to 127.
󱀝 EXPRESSION - CONTROL NUMBER
Sets the MIDI Control Change number (CC#) of the Expres-
sion pedal.
 e way of controlling volume di ers type by type of the MIDI
equipment to be connected.  is parameter is for setting a
proper number to control the volume of the connected MIDI
equipment.
You can select 7: VOL, 11: EXP.
󱀞 MESSAGE - DAMPER
Sets whether to transmit the Damper information (Control
Change #64) to the selected Zone.
NOTE: The parameters in these modes are Patch parameters, and
are recorded to the Patch.
PANIC FUNCTION AND PARAMETER RE-LOAD
If a problem occurs to the MIDI system, it may be caused by
a cypher. When the SKX and an external MIDI equipment is
connected, such a problem could happen due to the di erence
between the setting contents of both equipment.
In such a case, touch both [], [] buttons. Both the “All
Note O ” and “Reset All Controllers” are sent to the MIDI
channels of all External Zones (Panic Function), then the set-
tings of all External Zones are reloaded (sent again).
󱀛
󱀛
󱀜
󱀜
󱀞
󱀞
󱀝
󱀝