Operation Manual

Turn On and Play

ADD EFFECTS

VIBRATO/CHORUS

“Vibrato and Chorus” slightly changes the Drawbar pitch at a certain ratio and add warmth to

the sound.

[V1/C1], [V2/C2] Button

Controls the Vibrato Depth and Switches on and off the Vibrato effect. The LED turns on

when it is ON.

The Vibrato effect is OFF when the two LEDs are OFF and are at maximum Vibrato Depth

when the two LEDs are ON (V3).

[CHORUS] Button

It mixes Vibrato and original sound (= Chorus Effect) and adds richness to the sound.

NOTE: You can set the speed of Vibrato/Chorus. (P. 69)

OVERDRIVE

The overdrive effect simulates the effect of applying an excessively high signal to the

amplifier input which causes distortion of the sound.

[O.D. ON] Button

Press this button to switch on the LED, and get the Overdrive Effect.

[OVERDRIVE] Knob

This knob controls the degree of distortion. The Overdrive effect is minimum when the knob

is turned fully counter clockwise “MIN”. The Overdrive effect gets maximum when it turned

to “MAX” clockwise.

LESLIE

The bass rotor and the rotating horns produce the effect of the spatial, dynamic and lively

theater stage performance.

[LESLIE ON] Button

Touch “ON” to switch on, the LED is lit.

[LESLIE FAST] Button

This button controls the two rotor speeds. When the LED is ON, it is FAST. When the LED is

OFF, it is SLOW. The most effective and popular way to use this is to mainly play SLOW

and lead to the climax by changing to FAST.

[LESLIE BRAKE] Button

This is to set the action when the LESLIE ON Button is OFF.

When the LED is ON, BRAKE is on. The rotation gradually slows down and stops finally).

When the light is OFF, it is THROUGH. The Leslie effect is by-passed.

NOTE: You can control the rotors by these buttons when you connect the LESLIE to

the external equipment.

NOTE: You can finely adjust the rotation speed etc. of the internal LESLIE Effect. (P.

66)

You can use Extra Voices (i.e. Electric Piano, Clav, etc.) instead of organ sounds.

[EXTRA VOICE / REVERB] Button

To use the Extra Voice, touch the button and switch on the LED.

NOTE: You can select the Extra Voice. (P. 74)

USING EXTRA VOICES