Operation Manual

*#1 :-Owner’s Manual

COMBINATION PRESETS

The settings you have made can be recorded into the Combination Presets.

BANK AND NUMBER

The combination preset chart to the left, shows the [BANK]

and the [NUMBER], information.

Access is made by the Preset Buttons. To select the [BANK],

press the key, holding down the [BANK] button. To select the

[NUMBER], just press the Preset Button.

Recording and recall is determined when the Number is

designated. Only selecting the Bank does not affect the

recording or recall.

Refer to the illustration on the left bottom for each Button and

Name.

The [ADJUST] button on the right end is a special Preset,

called “Adjust Preset”. Here the Drawbar Registration on the

panel always matches the internal registration.

NOTE: The setting of the Preset Buttons [C] to [A] on the B-3/C-

3 is fixed, and the [A#] and [B] are used to switch the

Drawbar Registration on the panel. However, on this

model, you can change the setting by moving the

Drawbars, even while using the buttons [1] to [11].

COMBINATION PRESETS

On the original B-3 organ, the preset keys only stored drawbar

registration information. On the XK-1 however, in addition to

drawbar registration, you can store many various parameters to a

preset. Thus the name “Combination Preset”.

NOTE: The parameters to be recalled by the Preset Keys can be

limited Bank by Bank. (P. 56)

Combination Presets

1 2 3 4 567 8 9 10 11 Ad

Bank

Number

Adjust