Operation Manual

*#1 :-Owner’s Manual
44
RECORD A NEW THE COMBINATION PRESET
EXAMPLE: Record into “6-3”.
If the display is not in PLAY mode, touch the [PLAY] button to
back to the PLAY mode.
This operation is not necessary, if the display is in PLAY mode.
Press the Preset Button [3], while holding down the [REC/
JUMP]. The Preset becomes final and the display shows as
follows for a few seconds.
Recording Preset...
When the recording is completed, the LED on the Preset Button
[D] flashes for a while. (The recorded Preset Number will be
automatically selected.)
The display will return to the previous screen.
 You can not record to the Preset Button [ADJUST] by
using this procedure.
NOTE: The Preset data recorded will not be lost even after you
switch off the power.
1
2
Go to the PLAY mode.
Select the Number.
While holding down the [BANK] button, touch the Preset
Button [6].
The LED on the Preset Key indicates the BANK while you are
holding down the [BANK] button.
NOTE: The LED will be OFF, if you release the button. This
means the Preset is not stored.
This operation is not necessary, if you do not change the Bank.
2
Select the Bank.
Flash to
On
Press and hold
Touch
Press and hold
Touch
Lights