Operation Manual

Using the Control Panel

FUNCTION MODE

The FUNCTION MODE is for making each setting and adjustment.

There are many displays, but the basic operation is the same.

HOW TO READ THE DISPLAY

BUTTON OPERATION IN THIS MODE

CURSOR

In the display window of this keyboard,

the CURSOR is displayed in the flashing

style, while the most popular indicator-

cursor used on the PC, the mobo, etc. is

in the shape of an arrow, a square or an I-

shape.

This shows there are PAGEs

above (or below).

PARAMETER

PAGE

NAME

VALUE CURSOR

(Flashing VALUE)

This shows there is a PAGE on the

right (or on the left).

Returns to the

PLAY mode.

This button is used to move the CURSOR

right or left for selecting the PARAMETER to

change.

The CURSOR moves to the edge of the

display and on to the next page (on the right

or left), if there is one.

Touching this button while holding [REC/

JUMP] button, you can move to the right or

left page regardless where the cursor is.

The CURSOR increases or decreases

the value of the Parameter.

Holding it increases (or decreases) the

value continuously.

Touching it while holding the [REC/

JUMP] button increases (or decreases)

the value quickly.

The value can also be changed by the

[VALUE] knob on the left.

Moves from a page to another.

You can jump to the top or bottom page by touching these

buttons with holding down the [REC/JUMP] Button.