Operation Manual

Setting the Parameters
63
TUNE
In this mode, you can tune and transpose for playing in ensemble with the other
instruments.
To locate to this mode:
Touch the [MENU/EXIT] button (MENU will displayed), select PAGE A by the [PAGE]
button and touch the [3] TUNE button.
1 2
1. TRANSPOSE
You can transpose the entire keyboard in semi-tone increments.
The setting range is -6 to +6.
Transpose effects:
 between the manual keyboard and the built-in sound engine, and
 between MIDI IN and the built-in sound engine.
 The Master Course Tune of RPN is sent to the External Zone.
 If you connect the MIDI Pedalboard XPK-100, the parameter will be changed by
the transpose operation, too.
2. MASTER TUNE
This is for changing the PITCH of this entire keyboard.
The setting range is A = 430 - 450 Hz.
NOTE: The parameters in this mode are the Global Parameters. They are recorded when
the value is set. Also, they are common at each Combination Preset.