Operation Manual

*#1 :-Owner’s Manual

CUSTOM TONEWHEELS

In this mode, you can select and regulate each the Tone-Wheel Set for the

Manual Keyboard.

We call this “CUSTOM TONEWHEELS”.

The typical 3 (or 4) types of settings are recorded when delivered from the

factory.

To locate this mode:

Touch the [MENU/EXIT] button and display MENU, select PAGE B by the [PAGE]

button, and then touch either [1] B-type, [2] Mellow, or [3] Brite button for the

desired Tonewheel Set.

Also, the Temporary (= the present setting) automatically switches to the

1. CUSTOM NUMBER

This is for selecting the “CUSTOM NUMBER” to use.

Each Custom Number has parameters that wheel-by-wheel “Level”, “Cut Off Fre-

quency” etc.

For example, to the B-type, “Real B-3” simulating the well-preserved B-3/C-3 and

“80's Clean” with less leakage noise, rough sound “Noisy”, and “Noisy 60” louder

leakage noise is stored.

NOTE: This parameter is a Global Parameter. It is common for the same Tone-wheel Set

(= “B-type” here) of each Combination Preset.

NOTE: You can not edit the wheel-by-wheel parameters on this model.

LEAKAGE NOISE

On the B-3/C-3, the signal leakes in the route from

the pick-up mounted for the Topnewheels to the

output terminal, thus noise (= mixed Tone-wheel

sound) was also heard, This is called “Leakage

Noise”.

The “Leakage Noise” is an obstacle in making pure

tones, but it is recognized as a character now.

“Mellow” and “Brite” does not include the “Leakage

Noise”.