Operation Manual

*#1 :-Owner’s Manual

LESLIE

In this mode, you can create your own setting for the

built-in Leslie Effect.

There are many parameters for the built-in Leslie Effect,

and so you create various settings, but not per each

Combination Preset independently.

The parameters are treated by the group called "CABI-

NET". You can select the CABINET NUMBER in the

Combination Presets.

To locate this mode:

1. Touch the [MENU/EXIT] button to display the MENU.

Then select PAGE C by the [PAGE] button and touch [3]

LESLIE.

2. Or, hold down either [LESLIE BREAK], [LESLIE ON] or

[LESLIE FAST].

CONCEPT OF THE CABINET NUMBERS

Each Cabinet represents one imaginary Leslie

Speaker prepared by the Leslie Parameter.

This parameter is the only Preset Parameter in this

mode.

CABINET NUMBERS

1. LESLIE CABINETS

Here you select the CABINET NUMBER to use in the Combination Presets.

The setting range is 1 - 8. The “*” will displayed when the Leslie Parameters are

changed from this Cabinet Number.

LESLIE PARAMETERS

2. CABINET NAME

This is for putting the Cabinet Names.

Move the cursor by the [PARAMETER] button and select letters by the [VALUE].

In this mode, only the present value “Temporary” changes and there is no determining

operation. You must record the name by doing “Recording the Cabinet” as explained

in the next paragraph. Otherwise the data will be lost.

3. SLOW SPEED - HORN

10. SLOW SPEED - BASS

Here the Speed of the Rotor is set for Slow Speed.

The setting range is 0, 24 - 318 rpm. It does not rotate at 0.

4. FAST SPEED - HORN

11. FAST SPEED - BASS

Here the Speed of the Rotor is set for Fast mode.

The setting range is 0, 375 - 453 rpm. It does not rotate at 0.

3 4 5 6 7 8

10 11 12 13 14 15

16 17