Operation Manual

*#1 :-Owner’s Manual
84
MIDI
This is the mode to do the basic setting of MIDI.
To locate this mode:
Touch the [MENU] button to display the MENU, select PAGE D by the [PAGE] button, and
then touch the [2] MIDI button.
MIDI TEMPLATE
1. MIDI TEMPLATE
This is the mode for setting each function simply.
Typical settings can be recalled, by touching the [PARAM]
button to select the usage and touching [4] RECL.
MASTER
2. MIDI IN
This is for setting the behavior of the two MIDI IN terminals.
UPPER / PEDAL:
Each MIDI IN terminal acts as a receiving terminal for the
LOWER and PEDAL Parts, regardless of the channel.
This assigns the Manual Bass Function to the MIDI IN
(LOWER) terminal.
The Split function will be disabled. (Disregard the [SPLIT]
Button.)
The input from each MIDI IN terminal will be resent by
each Keyboard Channel of 12 and 13.
IN 1/IN 2:
Each acts in accordance with each designated channel.
Assigns the Manual Bass Function to the Manual Key-
board of this keyboard.
The Pedal Part produces polyphonic sound, regardless of
the value of the Key Mode (POLY/MONO).
3. LOCAL
This is for switching ON/OFF the LOCAL CONTROL
(internal).
If ON, the keyboard of this module and the sound engine are
connected.
If OFF, the keyboard and the sound engine are cut off. The
keyboard does not sound, if touched.
You can treat this module as if it is a two different equipment: a
MIDI keyboad and a Sound Module.
4. NRPN
This is for switching ON/OFF the transmission of (= send
and return) of NRPN (Non-Registered Parameter Number).
On this keyboard, it switches ON/OFF whether to send/
receive the message of Drawbar Fold-Back, Leslie ON, etc.
At ON, the message is sent/received. At OFF, the message
is not sent.
5. LESLIE
This is for controlling how to send Leslie Parameters.
XK:
The Leslie Parameters will be sent out on XK-1 original
NRPN address and data.
21:
The Leslie Parameters will be sent out for Leslie 21
series NRPN address and data.
When the Combination Preset is selected, the
parameters are sent out also.
6. PROGRAM CHANGE
This is for switching the sending and receiving of the
Program Change/Bank Select by the Keyboard Channel.
On this keyboard, this is for switching the Combination
Preset using the Program Change and the Bank Select.
When ON, this does send/receive. When OFF, no data is
sent.
7. REGISTRATION
This is for switching ON/OFF the Drawbar Registration
send/receive at the Keyboard Channel.
This is to select whether or not to send/return the informa-
tion of the movement of each footage of the Drawbars.
When ON, it transmits/receives. When OFF, it does not.
8. WHEEL
This switches ON/OFF the Send/Receive of the Pitch Bend
and Modulation information at the Keyboard Channel.
When ON, it transmits/receives. When OFF, it does not.
1
2 3 4 6 7 8
11 12 13
5