Operation Manual

*#1 :-%Owner’s Manual
102
OPERATE THE SETUP
Save or Load the SET UP to/from the CF card in the SETUP mode. In this mode,
you can do all the operations except the initialization of the CF card.
To come to this menu:
Touch the [MENU] button to display the MENU, select PAGE D by the [3] SETUP button.
SAVE THE SETUP
Select the SET UP NAME “NewSetup” by the [PAGE]
button.
NOTE: “NewSetup” means a fresh save. If you select an
existing SET UP NAME, it will be deleted and writ-
ten over (= renewed).
Check that the CF CARD is correctly inserted.
Go to the SETUP mode.
WHAT DOES THIS MEAN?
CF is not ready
The CF CARD is not correctly inserted.
2
A temporary name is put to the saved SET UP “Setup xx”
automatically.
5
Setup Name
This indicates there is
another SETUP file above
(or below).
Load
Save
Rename
Delete
3
1
Touch the [2] SAV button.
SAVE starts.
4
HOW TO READ THE DISPLAY