Operation Manual

ManualsBrandsHammond ManualsAudioXK 3-C

*#1 :-%Owner’s Manual

You can record various settings to the Preset Keys mounted

on the left-hand side of the XK-3C. This is called “Combi-

nation Preset”.

The Combination Preset consists of the “BANK” and

“KEY” (2-dimensional) such as “C-D”, and appears for

each setting on the Display.

The Preset data is recorded in the Banks C to B at the fac-

tory. Thus you can start playing immediately.

PLAY WITH THE COMBINATION PRESET

The chart on the left is for the Combination Preset. The “BANK”

is shown vertically (line) and the “KEY” horizontally (column).

Select one combination from this chart and play.

“C - B” is initially selected at the factory.

The example below recalls this.

1. Select the BANK

While holding down the [BANK] Button, press the Preset Key

[F].

NOTE: The LED for the Preset Key indicates the “BANK”,

while the [BANK] Button is pressed.

EX. Select “F - G”

HOW TO RECALL THE PRESET

2. Select the KEY

Press the Preset Key [G].

At this time the Preset is decided and the setting changes.

NOTE: While the [BANK] Button is released, the LED indi-

cates the “KEY”.

“F - G” appears on the bottom left of the Display.

Recall various Combination Presets and play.

When you recall a Combination Preset, not only Drawbars but

also the Effects such as Leslie and Reverb change altogether.

However, the BANK B of the factory setting changes only the

Drawbars. This action is the same as on B-3 or C-3.

NOTE: You can set the types of the Parameter you recall.

(P. 58)

NOTE: Some Combination Presets cause sound cut-off or

audio interruption, when they are selected while

pressing keys.

NOTE: The Preset Key “C” creates no sound (, if combined)

with any Bank in default. This is called “Cancel”.

Combination Presets

C C

D D

EFF

G G

A A

Bank

Key

Adjust B

Light

Press and Hold

Light

Touch