Operation Manual

Turn On and Play

ADD EFFECTS

VIBRATO & CHORUS

“Vibrato and Chorus” slightly changes the Drawbar pitch at a certain ratio and add warmth to the

sound.

[UPPER] Button

Switches on and off the Vibrato effect. The LED turns on when it is ON.

[VIBRATO & CHORUS MODE] Knob

Controls the Vibrato Depth and switches to and from the Chorus effect.

The degree of the depth corresponds with the number. Also “V” adds only Vibrato sound by

changing the pitch, “C” mixes Vibrato and original sound (= Chorus Effect) and adds richness to

the sound.

NOTE: You can finely adjust the rotation speed etc. of the Vibrato/Chorus. (P. 76)

OVERDRIVE

The overdrive effect simulates the effect of applying an excessively high signal to the amplifiers

input which causes distortion of the sound.

[TUBE AMP] Button

Press this button to switch on the LED, and get the Overdrive Effect.

[TUBE OVERDRIVE] Knob

This knob controls the degree of distortion.

NOTE: The LED for the TUBE AMP Button varies the color according to the distortion

degree. When it is through the TUBE AMP without distortion, it is green. It goes red

when the distortion degree increases.

NOTE: You can finely adjust the Overdrive Effect. (P. 78)

LESLIE

The rotor and the rotating horns produce the effect of the spatial and dynamic and lively theater

stage performance.

[LESLIE ON] Button

Touch “ON” to switch on the LED.

[LESLIE FAST] Button

This button controls the rotor at two different speeds. When the LED is ON, it is FAST. When

the LED is OFF, it is SLOW. The most effective and popular way to use this is to mainly play

SLOW and lead to the climax by changing to FAST.

[LESLIE BRAKE] Button

This is to set the action when the LESLIE ON Button is OFF.

When the LED is ON, BRAKE is on. The rotation gradually slows down and stops finally).

When the light is OFF, it is THROUGH. The Leslie effect is by-passed.

NOTE: You can control the rotors by these buttons when you connect the LESLIE to the

external equipment.

NOTE: You can finely adjust the rotation speed etc. of the internal LESLIE Effect. (P. 72)

REVERB

This gives the reverberation effect of being in a concert-hall.

[REVERB] Button

To get the Reverb Effect, touch the button and switch on the LED.

NOTE: You can finely control time etc. of Reverb. (P. 81)