Operation Manual

Turn On and Play
27
STORING REGISTRATIONS IN COMBINATION PRESET
All the afore-mentioned settings can be memorized to the Combination Preset.
The data stored at the factory can also be freely re-written.
EX. Memorize to “F - D”.
1. While pressing the [BANK] Button, press the Preset Key [F].
The LED on the Preset Key indicates BANK while the [BANK] Button is pressed.
NOTE: The LED goes out if you release the button. This means the Preset
is not final.
2. While pressing the [REC/JUMP] Button, press the Preset Key [D].
The Preset is finalized and Recording Preset appears on the display for a while.
When the recording is completed, the LED on the Preset Key [D] flashes for a
few seconds and then switches on. The Display returns to the previous mode.
The recorded Preset will be automatically selected.
 The Preset Key [B] (or [A
< ] - when the control mode is in “Upper A < /
B”) does not memorize registrations by this operation.
NOTE: The recorded Preset data does not go out if the power is switched
off.
1
2
Light
Press and Hold
Touch
Press and Hold
Touch
Flash to
On