Operation Manual

Setting Up

EQUALIZER & REVERB

The Equalizer and the Reverb effects give the final touch to the tone.

The Equalizer regulates the tone, and the Reverb adds the resonance of the hall perfor-

mance.

You can control portions of their functions on the panel buttons and knobs

EQUALIZER

[TONE] KNOB

One optional Parameter out of the Equalizer is assigned and regulated.

TONE is assigned as the factory setting. If you turn this knob to the right, it gives flat

characteristics and, if to the left, the treble is decreased.

[TONE TYPE] BUTTON

This assigns the settings to the [TONE] KNOB.

At every touch, the assignment changes in the order of [B]ass, [M]iddle, [T]reble, and

[t]one. The initial letter of the word is displayed in the PLAY mode.

NOTE: For further details, please read the section “EQUALIZER” (P. 80)

REVERB

[REVERB] BUTTON

This is for switching ON and OFF the Reverb Effect.

To get the Reverb Effect, press the button and the LED will light.

NOTE: You can change the time and the depth of the Reverb. (P. 81)

The illustration indicates

[t]one is at +9.