Operation Manual

*#1 :-%Owner’s Manual

COMBINATION PRESETS

The settings you have made can be recorded into the Combination Presets.

BANK AND KEY

The combination preset chart to the left, shows the [BANK] and

the [KEY], information.

Access is made by the Preset Keys. To select the [BANK], press

the key, holding down the [BANK] button. To select the [KEY],

just press the Preset Key.

Recording and recall is determined when the Key is designated.

Only designating the Bank does not switch the recording or re-

call.

Refer to the illustration on the left bottom for each Key and Name.

The [B] key on the right end is a special Preset, called “Adjust

Preset”. Here the Drawbar Registration on the panel always

matches the internal registration.

NOTE: The setting of the Preset Keys [C] to [A] on the B-3/C-3 is

fixed, and the [A

<] and [B] are used to switch the Drawbar

Registration on the panel. However, on this model, you can

change the setting by moving the Drawbars, even while us-

ing the keys [C] to [A].

COMBINATION PRESETS

On the original B-3 organ the preset keys only stored drawbar reg-

istration information. On the XK-3C however in addition to drawbar

registration you can store many various parameters to a preset.

Thus the name “Combination Preset”.

NOTE: The parameters to be recalled by the Preset Keys can be

limited Bank by Bank. (P. 58)

Combination Presets

C C

D D

EFF

G G

A A

Bank

Key

Adjust B