Operation Manual

*#1 :-%Owner’s Manual

RECORD INTO THE COMBINATION PRESETS

EXAMPLE: Record into “F-D”.

While holding down the [BANK] button, touch the Preset Key

[F].

The LED on the Preset Key indicates the BANK while you are

holding down the [BANK] button.

NOTE: The LED will be OFF, if you release the button. This means

the Preset is not stored.

This operation is not necessary, if you do not change the Bank.

Press the Preset Key [D], while holding down the [REC/JUMP].

The Preset becomes final and the display shows as follows for a

few seconds.

Recording Preset...

When the recording is completed, the LED on the Preset Key

[D] flashes for a while. (The recorded Preset will be automati-

cally selected.)

The display will return to the previous screen.

 You can not record to the Preset Key [B] (or [A<] - when

the control mode is in “Upper A</B”) by this operation.

NOTE: The Preset data recorded will not be lost even after you

switch off the power.

Light

Select the Bank.

Select the Key.

Flash to

Press and hold

Touch