Operation Manual

Using the Control Panel
49
PLAY MODE
The PLAY MODE is the basic display for all the operations. The necessary informa-
tions for the normal play will be displayed.
There are two types of PLAY MODE screens to display the Drawbar Registration.
One is by showing the length of the bars and the other by digits.
To locate this mode:
1. Immediately after powered ON and the start up process is complete, the PLAY mode is
displayed.
2. If a different mode is displayed, touch the [PLAY] button.
These two PLAY mode displays (= the bar dis-
play and the digital display) will be switched ev-
ery time you touch the [PLAY] button.
In the bar display, the Combination Preset name
is shown but another Preset Key, if assigned to
the LOWER Part is not shown.
Also, the function assigned to the [TONE] knob
and its value is displayed.
HOW TO READ THE DISPLAY
Advanced Feature - DISPLAY LOCK
This advanced feature allows you to put the organ into a special playing mode
whereby the Control Panel is rendered inoperative. Touching any of the Se-
lect Touch Buttons will have no effect. This is useful when you want to place
the organ in such places as public halls or auditoriums.
To effect this Display Lock function, switch on the power pressing PARAM
[W], [X] and [PLAY]. Then “Display LOCKED...” will be displayed for a
few seconds. To unlock it, do the same thing as above. This time “Display
UNLOCKED..” will appear for a few seconds.
Preset Bank -
Key :
Name
Drawbar registration
UPPER Part/ PEDAL Part/ LOWER Part
Value of
OVERDRIVE
BAR display
DIGITAL display
Preset Bank -
Key on LOWER Part/
Key on UPPER Part
[TONE] knob
Assignment:
Value
Sounding on MIDI Note
Message
The Preset name is not shown in the digital mode
display, but you can see the Preset Key of the
LOWER Part.
Also, the value of the Overdrive and the MIDI IN
Note Information is displayed.