Operation Manual

*#1 :-%Owner’s Manual

SHORT CUT TO THE FUNCTION MODE

Each button on the panel has a “SHORT-CUT” capability, so that you can easily go

to each Function mode. By holding down the button, you can easily go to the desired

mode display. You can save time to search the page for the parmeters you want to

change.

For example, if you want change the Percussion setting, you can go

to the PERCUSSION FUNCTION MODE display, by holding down

either [SECOND], [THIRD], [FAST], or [SOFT] for a while. This is

called “SHORT CUT”.

Short-cut buttons will be explained in the next Chapter “SETTING

THE PARAMETER”.

NOTE: You can change the time for holding down the button for “SHORT

CUT”. (P. 65 #21)

RECORD THE PAGE YOU FREQUENTLY USE

You can record the page which your usually use, and go to that page by only touch-

ing the [CONTROL] button.

Example of operation: Record the Drawbar - Pedal Page

Touch and Hold

Touch

Go to the page to be recorded by using MENU etc.

Touch and hold the [REC/JUMP] , and touch the [CONTROL]

button.

Next time, you can come to this page by only touching the

[CONTROL] button.

Example of operation: Move to the Percussion Function Mode.

Touch and Hold