Operation Manual

ManualsBrandsHammond ManualsAudioXK 3-C

Setting the Parameters

NOTE: The parameters by the names

with (P) on the end are Preset

Parameters, and are recorded to

each Combination Preset. (G) is

for “Global”. These parameters

will be recorded when set, and

are common in each Combina-

tion Preset.

DAMPER

The word “Damper” comes from the damper pedal

of the piano.

The piano stops sounding when you release your

finger from the key. This is because of the damper

system. While you hold the damper pedal, the

system does not work and so it keeps sounding

even after you release the key.

SPRING REVERB

The Spring Reverb is a reverb effect to obtain the

reverberation using the spring resilience. It was

easily affected by a shock and it use to give a big

“clang”.

However, this drawback has come to be used as

an effect in the genre of progressive rock. This

keyboard gives the simulated sound.

TIP AND RING

When you look at the plug of the stereo head-

phones, there are 3 metal parts. The head portion

is called “Tip” and the middle portion is the “Ring”.

The part on the cord side is called “Sleeve”.

The ordinary foot-switch has only the Tip and the

Sleeve, but the footswitch with two switches in one

plug or two footswitches using the L/R converting

cable can be connected.

18. FOOT-SWITCH - 1 TIP (G)

This is for setting the function of the Foot Switch 1 jack.

If you are using the Foot Switch with a stereo plug, this sets the function on the tip contact.

OFFOFF

OFF: Does not work.

LESLIE S/F ALLESLIE S/F AL

LESLIE S/F AL

, MOM, MOM

, MOM:

These are for switching SLOW/FAST of the Leslie Effect.

At ALT, SLOW/FAST is alternately switched at each step of the Foot Switch, and

it switches OFF if pressed for longer than 1 second.

At MOM, the Leslie effect gets Faster, as long as you keep pressing the foot switch,

and it gets Slower if you release it.

AMPER UPPERAMPER UPPER

AMPER UPPER,

L L

OWEROWER

OWER,

PED PED

PED

ALAL

AL:

They hold the Notes of the UPPER, LOWER and PEDAL Parts, respectively, as

long as you keep depressing the footswitch.

PRESET FWDPRESET FWD

PRESET FWD

, REV, REV

, REV:

They are for switching one Combination Preset to the right (FWD) or the left

(REV).

SPRINGSPRING

SPRING:

This is for producing a springing sound of the Spring Reverb.

DELADELA

DELA

Y TIMEY TIME

Y TIME:

This function sets the delay time (P. 81 #4) of the reverb effect, by the interval of

pressing the foot-switch. By pressing and holding the foot-switch, the delay sound

will be erased.

19. FOOT-SWITCH - 1 RING (G)

This is for setting the function on the RING contact, if you use the FOOT SWITCH equipped

with the Stereo plug.

20. FOOT-SWITCH - 2 MODE (G)

This is for setting the function of the FOOT SWITCH attached to the Expression Pedal EXP-

100F (= optional).

USER

21. USER (G)

This is for setting the function of the [USER] BUTTON.

PEDPED

PED

AL SUSAL SUS

AL SUS: Switches On/Off Sustain of the PEDAL Part.

OWER OCTOWER OCT

OWER OCT: Switches 0/+1 of the LOWER Octave.

LES. BRAKELES. BRAKE

LES. BRAKE: Means the [LESLIE BRAKE] Button.

LES. ONLES. ON

LES. ON: Means the [LESLIE ON] Button.

LES. FLES. F

LES. F

ASTAST

AST: Means the [LESLIE FAST] Button.

VIB. UPPERVIB. UPPER

VIB. UPPER: Means the VIBRATO & CHORUS [UPPER] Button.

VIB. LVIB. L

VIB. L

OWEROWER

OWER: Means the VIBRATO & CHORUS [LOWER] Button.

LESONREVLESONREV

LESONREV: Switches On/Off Leslie On Reverb.

DISPLAY

22. DISPLAY - SHORT CUT (G)

It sets the time limit to the short cut function.

The range is 0s to 2s and NO short cut. The short cut function does not work when the value

is in “NO”.

23. DISPLAY - TIME OUT (G)

It sets the time limit to return to the previous screen from the one displayed by using the short

cut operation.

The range is 4s to 16s and NO time out. The time out function does not work when the

value is in “NO”.