Operation Manual

Setting the Parameters

TUNE

In this mode, you can tune and transpose for playing in ensemble with the other instru-

ments.

To locate this mode:

Touch the [MENU/EXIT] button (MENU will displayed), select PAGE B by the [PAGE] button

and touch the [3] TUNE button.

TRANSPOSE AND TONEWHEELS

If you set the transpose value at other than 0, the

relation between the keys and the Tonewheels gets

off. So, if you try to tune the Tonewheels by the

keyboard and the Drawbars at this time, you can-

not select the desired wheels.

1. TRANSPOSE

You can transpose the entire keyboard by the semi-tone.

The setting range is -6 to +6.

Transpose effects:

 between the manual keyboard and the built-in sound engine, and

 between MIDI IN and the built-in sound engine.

 External Zone.

 If you connect the MIDI Pedalboard XPK-100, the parameter will be changed by the

transpose operation, too.

2. MASTER TUNE

This is for changing the PITCH of this entire keyboard.

The setting range is A = 430 - 450 Hz.

NOTE: The parameters in this mode are the Global Parameters. They are recorded when the

value is set. Also, they are common at each Combination Preset.

1 2