Operation Manual

*#1 :-%Owner’s Manual

LESLIE

In this mode, you can do the setting for the built-in Leslie

Effect and the External Leslie Speaker.

There are many parameters for the built-in Leslie Effect,

and so you can do various settings, but not per each Combi-

nation Preset independently.

The parameters are treated by the group called “CABINET”.

You can select the CABINET NUMBER in the Combina-

tion Presets.

To locate this mode:

1. Touch the [MENU/EXIT] button to display the MENU. Then

select PAGE C by the [PAGE] button and touch [3] LESLIE.

2. Or, hold down either [LESLIE BREAK], [LESLIE ON] or

[LESLIE FAST].

CONCEPT OF THE CABINET NUMBERS

Each Cabinet represents one imaginary Leslie Speaker

prepared by the Leslie Parameter.

This parameter is the only Preset Parameter in this

mode.

CABINET NUMBERS

1. CABINET NUMBER

Here you select the CABINET NUMBER to use in the Combination Presets.

The setting range is 1 - 8. The “*” will displayed when the Leslie Parameters are

changed from this Cabinet Number.

LESLIE PARAMETERS

2. CABINET NAME

This is for assigning the Cabinet Names.

Move the cursor by the [PARAM] button and select letters by the [VALUE].

In this mode, only the present value “Temporary” changes and there is no determining

operation. You must record the name by doing “Recording the Cabinet” as explained in

the next paragraph. Otherwise the data will be lost.

3. AMPLIFIER

This sets the type of the imaginary power amplifier.

SolidSolid

Solid: Amplifier with a flat characteristic

ubeube

ube: Simulated Tube Amplifier with a mild characteristic.

5 6 7 8 9

10 11

12 13 14 15 16 17

18 19