Operation Manual

Setting the Parameters

4. SPEAKER

This sets the type of the imaginary speaker.

RotSmallRotSmall

RotSmall: A small Leslie speaker represented by Leslie 145

RotLargeRotLarge

RotLarge: A large Leslie speaker represented by Leslie 122

StationStation

Station: A stationary speaker represented by Hammond PR-40

5. SLOW SPEED - HORN

12. SLOW SPEED - BASS

Here the Speed of the Rotor is set for Slow mode.

The setting range is 0, 24 - 318 rpm. It does not rotate at 0.

6. FAST SPEED - HORN

13. FAST SPEED - BASS

Here the Speed of the Rotor is set for Fast mode.

The setting range is 0, 24 - 453 rpm. It does not rotate at 0.

7. HORN LEVEL

14. BASS LEVEL

The Volume of each Rotor is set. The setting range is 0 to -12dB.

8. RISE TIME - HORN

15. RISE TIME - BASS

Here the Time is set for the Rotor to reach the Fast Speed, when you go from

Slow or Break to Fast mode. The setting range for the Horn Rotor is 0.2 - 5.0s,

and that for the Bass Rotor is 0.5 - 12.5s.

9. FALL TIME - HORN

16. FALL TIME - BASS

Here the Time is set for the Rotor to reach the Slow speed, when you go from

Fast to Slow mode. The setting range for the Horn Rotor is 0.2 - 5.0s, and that

for the Bass Rotor is 0.5 - 12.5s.

10. BREAK TIME - HORN

17. BREAK TIME - BASS

Here the Time is set for the Rotor to stop, when you go from Fast mode to Break.

The setting range for the Horn Rotor is 0.2 - 5.0s, and that for the Bass Rotor is

0.5 - 12.5s.

11. HORN CHARACTER

Here the Tone of the Horn Rotor is set.

“FLAT” is a flat tone, and the others are the tones with each “peaky” character-

istic.