Operation Manual

*#1 :-%Owner’s Manual
74
CHANNELS OF CURRENT LESLIE MODELS
122XB, 3300: 1ch
2101/2102: 3ch
18. MIC - ANGLE
This is the parameter to set the LOCATIONS of the two Microphones for the
imaginary Leslie Speaker.
The ANGLE decides the distance between the two mikes.
The setting range is 0 - 180 degrees. The farther, the more stereophonic feeling
it gives.
19. MIC - DISTANCE
This is the parameter to set the DISTANCE between the imaginary Leslie Speaker
and the Microphones.
The setting range is 0.3 - 2.7m. The more the value increases, the less effective
it gets.
NOTE: When you operate the parameters 2 - 19, the setting range will be lost after
the power is switched off, if you do not do the recording operation of the
next paragraph.
EXTERNAL LESLIE SPEAKER
20. LESLIE CHANNEL
The Channel is set for the Leslie Speaker connected to the 11-pin terminal.
At “1”, the sounds always comes out of the Rotary Channel.
At “2 or 3”, the sounds are put out to the stationary channel when the [LESLIE]
button gets OFF and the [BREAK] button gets OFF. Otherwise, the sound comes
out of the Rotary Channel.