Operation Manual

ManualsBrandsHammond ManualsAudioXK 3-C

Setting the Parameters

REVERB

In this mode, you can change the setting for the REVERB EFFECT.

To locate this mode:

1. Touch the [MENU/EXIT] button for the MENU display, select PAGE C by the [PAGE] button,

and then touch the [4] REVERB button.

2. Or, hold down the [REVERB] button for a while.

PRESET PARAMETERS

Reverb is a Preset Parameter, designed to be actively

used as one of the tone-making parameters.

However, it is not practical to use Reverb as a tonal

complementary tool to match the room/stage/hall. In

such a case, if you switch off the P.LOAD RV/EQ in the

Preset function mode, the Reverb On/Off value does

not change when the preset is recalled. (P. 58)

1. DEPTH

This sets the Depth (= Volume) of the Reverb Effect.

The setting range is 0 - 15. If you increase the value, it will give

the audience the impression that the player is performing in a

larger room.

2. TYPE

This sets the Types of Reverb Effect.

Room 1Room 1

Room 1: Inside the room (short)

Room 2Room 2

Room 2: Inside the room (long)

LiveLive

Live: Live house

Hall 1Hall 1

Hall 1: Concert Hall (long)

Hall 2Hall 2

Hall 2: Concert Hall (short)

ChurchChurch

Church: Church

PlatePlate

Plate: Iron-plate Reverb

DelayDelay

Delay: Delay

anDlyanDly

anDly: Panning Delay

RevDlyRevDly

RevDly: Reverb + Delay

3. REVERB TIME

When the Type (3) is set at Room 1 to Plate, it sets the Time for

Reverb to fade out.

The setting range is 0 - 31. The higher the value, the greater the

impression of a large building.

4. DELAY TIME

When the Type (3) is set at Delay, PanDly, RevDly, it sets the

delaying time.

The setting range is 4.7 - 2000 ms. The higher the number, the

longer the delay gets.

NOTE: You can set the delay time with the foot switch (P. 65).

5. DELAY FEEDBACK

When the Type (3) is at Delay, PanDly, RevDly, it sets the amount

of the Feedback. (The delaying sound repeats.)

The setting range is 0 - 96%. The higher the value, the more

Feedback you get.

6. LESLIE ON REVERB

This sets the route of the Reverb and Leslie Effect.

OFOF

OF: Leslie to Reverb

ONON

ON: Reverb to Leslie

NOTE: These parameters are Preset Parameters and are recorded

to each Combination Preset.

1 2

3 5