Operation Manual

*#1 :-%Owner’s Manual

DEFAULT

In this mode, you can go back entirely or partially to the default setting as per shipped

from the factory.

To locate this mode:

Touch the [MENU/EXIT] button for the MENU display, select PAGE E by the [PAGE] button,

and then touch the [1] DEFAULT button.

To initialize each parameter, touch the [PARAM] button and then [4] OK.

1. ADJUST PRESET

Initializes the content of the Preset Key [B].

If the Drawbar Control mode is at “UPPER A</B”, the content of [A<] is also initialized.

If you do this operation before you start a new setting, you can start from the fresh status.

2. PRESETS

Initializes the content of all Combination Presets.

3. GLOBAL

Initializes the Global Parameters such as Master tune or assignment of the Foot Switch.

4. LESLIE

Initializes the content of all Cabinets.

5. TONE WHEEL

Initializes the Custom Tonewheels.

6. ALL

Initializes all parameters of this keyboard.

If anything caused an unstable condition on this keyboard system, the trouble would be

cleared.

NOTE: You can also totally initialize your module by switching the Power ON while touching and

holding [REC/JUMP] button.

NOTE: The value of the Preset Key [B] set by this function is different from Default - Adjust Preset

(#1).

1 2 3

5 64