Operation Manual

*#1 :-%Owner’s Manual
90
RECORDING AND PLAYING THE PERFORMANCE
This is the method to record and playback your performance, by connecting the Se-
quencer or Computer to your XK-3C.
1. Hook up as illustrated.
Connect the MIDI OUT to the MIDI IN of the Sequenser.
2. Recall “Seq. Record” by the MIDI template.
By this, the performance on this module is sent to the MIDI channel 1, 2 and 3.
3. Set the Keyboard Channel that you want.
4. Start the Sequencer recording.
5. Send the Memory Dump that you want.
6. Start the playing.
NOTE: If the MIDI Keyboard is connected to the MIDI IN terminal of this keyboard, these perfor-
mance information will be transmitted to each MIDI channel and sent out of the MIDI OUT
terminal.
1. Hook up as illustrated above.
If a MIDI keyboard is connected, unplug it and connect the MIDI OUT of the Sequencer to the
MIDI IN of this keyboard.
2. Recall “Seq. Play” by the MIDI Template.
By this, the messages received at the MIDI Channels 1, 2 and 3 are distributed to each Part.
3. Do the setting of the Keyboard Channel if necesary.
4. Starts Playback on the Sequencer.
 Only the built-in sound source can be recorded. The control of the External
Zone is not played back.
Recording to the Sequencer or the Computer
Playback from the Sequencer or the Computer
MIDI Keyboard
MIDI Pedal
Keyboard
MIDI Keyboard
MIDI Pedal
Keyboard