Operation Manual

MIDI

EXTERNAL ZONE

3 EXTERNAL ZONES (XU1, 2, 3) are provided for the internal

keyboard of this organ, 2 (XL1, 2) for the MIDI keyboard con-

nected to the MIDI IN (LOWER) (hereinafter Lower Keyboard)

and 1 (XP1) for the MIDI keyboard connected to the MIDI IN

(PEDAL) (hereinafter Pedal Keyboard).

You must switch the MIDI IN mode to “LOWER/PEDAL”, when

you use the External Zones on the Lower Keyboard and the Pedal

Keyboard (P. 96 #2).

9. SWITCH

This switch is set whether to send the MIDI message or not by

this zone. It is sent when switched ON.

10. MIDI CHANNEL

This is for choosing the MIDI channel to send to the External

Zone.

The range is 1 - 16.

11. MAP - LOW

12. MAP - HIGH

This is for setting the playing range of this zone on the keyboard.

Set the lowest note by LO and the highest one by HI. To forbid

the sending note data, set the “OFF” in the parameter HI.

NOTE: For 11 and 12, you can set the value by touching the [REC/

JUMP] button, while holding down a note on the keyboard.

13. PROGRAM - BANK MSB

14. PROGRAM - BANK LSB

15. PROGRAM - BANK PROGRAM CHANGE

This is for setting the Bank Select and the Program Change to

send to this Zone.

Generally, the tone of the synthesizer or the Sampler is switched

by the Bank Select and the Program Change. There are such mod-

els as do not receive the Bank Select. The receiving range is dif-

ferent from equipment to equipment.

You can choose 0 - 127 in the Bank MSB and the Bank LSB, and

1 - 128 in the Program Change.

16. NOTE - OCTAVE

This is for moving the octave to send to this zone. You can set the

pitch to be sent to the key by the octave, if the desired range is

different from that prepared by MAP LO/HI.

17. NOTE - VOLUME

This is for setting the volume (= Control Change #7) of this zone.

However, the set value will be null, if the CC# (item #22) is at

“7.VOL”.

21 22

23 24 25