Operation Manual

*#1 :-%Owner’s Manual
96
MIDI
This is the mode to do the basic setting of the MIDI.
To locate this mode:
Touch the [MENU] button to display the MENU, select PAGE D by the [PAGE] button, and
then touch the [2] MIDI button.
MIDI TEMPLATE
1. MIDI TEMPLATE
This is the mode for setting each function simply.
Typical settings can be recalled, by touching the [PARAM] but-
ton to select the usage and touching [4] RECL.
MASTER
2. MIDI IN
This is for setting the behavior of the two MIDI IN jacks.
LL
LL
L
OWER / PEDOWER / PED
OWER / PEDOWER / PED
OWER / PED
ALAL
ALAL
AL:
 Each MIDI IN jack acts as a receiving terminal for the LOWER
and PEDAL Parts, regardless of the channel (#13 - 15).
 This assigns the Manual Bass Function to the MIDI IN (LOWER)
jack.
 The Split function will be disabled. (Disregard the [SPLIT] But-
ton.)
 Input from each MIDI IN jack is resent by each of (#14, 15)
keyboard channel and the external zone.
 The Combination Preset Lock will be effective to MIDI IN.
IN 1/IN 2IN 1/IN 2
IN 1/IN 2IN 1/IN 2
IN 1/IN 2:
 Each acts in accordance with each designated channel.
 Assigns the Manual Bass Function to the Manual Keyboard
of this keyboard.
 The Pedal Part produces polyphonic sound, regardless of
the value of the Key Mode (POLY/MONO).
 While the Combination Preset is locked, you can call out the
Combination Preset by receiving the program change.
3. LOCAL
This is for switching ON/OFF the LOCAL CONTROL (inter-
nal).
If ON, the keyboard of this module and the sound engine are
connected.
If OFF, the keyboard and the sound engine are cut off. The key-
board does not sound, if touched.
You can treat this module as if it was two different pieces of
equipment: a MIDI keyboad and a Sound Module.
4. NRPN
This is for switching ON/OFF the transmission of (= send and
return) NRPN (Non-Registered Parameter Number).
On this keyboard, it switches ON/OFF whether to send/receive
the message of Drawbar Fold-Back, Leslie ON, etc.
When ON, the message is sent/received. When OFF, it is not.
5. LESLIE
This is for controlling how to send Leslie Parameters.
The Leslie Parameters sent on Upper Channel.
XKXK
XKXK
XK:
 The Leslie Parameters will be sent out on XK-3C original
NRPN address and data.
2121
2121
21:
 The Leslie Parameters will be sent out for Leslie 21 series
NRPN address and data.
 When the Cabinet Number is selected, the parameters are
sent out also.
6. PROGRAM CHANGE
This is for switching the sending and receiving of the Program
Change/Bank Select by the Keyboard Channel.
On this keyboard, this is for switching the Combination Preset
using the Program Change and the Bank Select.
When ON, this does send/receive. When OFF, it will not.
7. REGISTRATION
This is for switching ON/OFF the Drawbar Registration send/
receive at the Keyboard Channel.
This is to select whether or not to send/return the information of
the movement of each footage of the Drawbars.
When ON, it transmits/receives. When OFF, it does not.
8. WHEEL
This switches ON/OFF the Send/Receive of the Pitch Bend and
Modulation information at the Keyboard Channel.
When ON, it transmits/receives. When OFF, it does not.
1
2 3 4 5 6 7 8
13 14 15