User Manual

109
MIDI
TEMPORARY DUMP CONTENTS
The patch parameters, global parameters and
system parameters of the Temporary (= the
present setting values) are transmitted.
The contents of each patch or that of the Leslie
Cabinet are not transmitted. Use ‘All Dump’ for
saving them.
TO SAVE ALL
All the setting values of this keyboard are trans-
mitted by ‘All Dump’.
is neglected, when the Device ID does not match, even if the
messages for the same model.
󱀓 RECEIVE DUMP
 is switches reception of Memory Dump ON/OFF.
On this keyboard the total onboard memory can be transmit-
ted as a Memory Dump, as system exclusive messages. To pre-
vent reception of Memory Dump, select OFF.
󱀔 TEMPORARY DUMP
Sends the Memory Dump.
When you press the [ENTER] button in this mode, the present
settings (see tips) are sent as a whole from the MIDI OUT jack.
Recording a Temporary dump before you record a performance
to an external sequencer, avoids setting mismatching upon se-
quencer playback.
󱀕 ALL DUMP
Sends the Full Memory Dump.
Pressing the [ENTER] button in this mode, transmits all the
settings through the MIDI OUT jack.
 KEYBOARD CHANNELS
Sets the MIDI channel to transmit at each part.  e setting
range is 1 to 16 and OF. At OF there is no transmission.
󱀖 TX UPPER
Sets the MIDI channel for sending the UPPER part playing
information, the control information, and that of the Leslie
speaker.
󱀗 TX LOWER
Sets the MIDI channel for sending the LOWER part playing
information.
󱀘 TX PEDAL
Sets the MIDI channel for sending the PEDAL part playing
information.
󱀙 RX UPPER
Sets the MIDI channel for receiving the UPPER part playing
information, the control information, and that of the Leslie
speaker.
󱀚 RX LOWER
Sets the MIDI channel for receiving the LOWER part playing
information.
󱀛 RX PEDAL
Sets the MIDI channel for receiving the PEDAL part playing
information.
 To avoid confusion of MIDI signals, set each MIDI
channel including the external zones (P. 106) to di er-
ent numbers.
NOTE: The settings in this mode are not recorded to the patches.
They are recorded upon setting, and are common at all patch-
es.
󱀔󱀕