User Manual

79
Setting the Parameters
❺ COLORATION(L)
Switches On/Off the coloration of the speaker enclosure.
❻ SLOW SPEED - HORN (L)
󱀖 SLOW SPEED - BASS (L)
Sets the speed of the rotor at slow mode.
 e setting range is 0, 24 to 318 rpm. At 0, no rotation.
❼ FAST SPEED - HORN (L)
󱀗 FAST SPEED - BASS (L)
Sets the speed of the rotor at the fast mode.
 e setting range is 0, 375 to 453 rpm. At 0, no rotation.
❽ HORN LEVEL (L)
󱀘 BASS LEVEL (L)
Sets the volume of each rotor.  e setting range is 0 to -12dB.
❾ RISE TIME - HORN (L)
󱀙 RISE TIME - BASS (L)
Sets the time for the rotors to “ramp up” to the ‘Fast Speed’, when switching from ‘Slow’
or ‘Stop’ to the ‘Fast’ mode.
 e setting range for the Horn Rotor is 0.2 to 5.0sec., and the Bass Rotor is 0.5 to
12.5sec.
󱀓 FALL TIME - HORN (L)
󱀚 FALL TIME - BASS (L)
Sets the time for the rotor to reach the ‘Slow Speed’, when switching from ‘Fast’ to ‘Slow’
mode.
 e setting range for the Horn Rotor is 0.2 to 5.0sec., and that for the Bass Rotor is 0.5
to 12.5sec.
󱀔 BRAKE TIME - HORN (L)
󱀛 BRAKE TIME - BASS (L)
Sets the time for the rotor to stop, when switching from ‘Fast’ to the ‘Stop’ mode.
 e setting range for the Horn Rotor is 0.2 to 5.0sec., and the Bass Rotor is 0.5 to
12.5sec.
󱀕 HORN CHARACTER (L)
Sets the tone of the Horn Rotor.
“FLAT” has no boost or cut in frequencies, and the “MID” or “DEEP” have “peaks” in
various tonal ranges, to mimic the particular characteristics of the horns.
󱀜 MIC - ANGLE (L)
Sets the virtual locations of the two virtual microphones for the virtual Leslie Speaker.
 e ANGLE decides the distance between the two virtual mikes.  e setting range is 0
to 180°. Farther settings exhibit more stereophonic characteristics.
󱀝 MIC - DISTANCE (L)
Sets the distance between the virtual Leslie Speaker and the virtual microphones.
 e setting range is 0.3 to 2.7m. Setting the range “further away” will result in a less
intense sound.
NOTE: When you operate the parameters 2 to 20, the setting range will be lost upon selecting
another Cabinet, another Patch or powering OFF the unit, unless you record the changes
into the User “Cabinet” (procedure following).
Rotor
Speed:
Rise
Time
Fall
Time
Brake
Time
Mode:
SLOW FAST SLOW FAST STOP
Distance
Angle