Operation Manual

Advanced Features

Hammond XPK-100 Quick Features Guide

Current Parameter

Current Value

Your Selected Value

Current Parameter Current Value

Ë Advanced Feature - E05 PK Volume

This Advanced Feature allows you to select the maximum volume or loudness of the pedal notes. You

can select from “0" through “127.” The default value is “127.”

TRY THIS:

2. From PLAY Mode, press the PLAY/EDIT Switch once. The Information Center Display

should alternate between two messages as shown below:

2. Press the PRESET/EDIT “” Switch repeatedly until the Information Center Display

alternates between two messages as shown below:

NOTE: You can also press the PRESET/EDIT “” Switch to arrive at the same Advanced Feature selection.

3. Now use the Pedal keys to select the Volume setting you want.

Using the DEC/INC Pedal keys:

Use the DEC (“A<”) Pedal key to decrease the Volume setting.

Use the INC (“B”) Pedal key to increase the Volume setting.

4. When you have made your selection, then press the Hi “C” Pedal once. The Information

Center Display will show you the current parameter alternating with your selected value:

5. To exit the EDIT Mode and return to PLAY Mode, press the “Hi C” Pedal again. The XPK-

100 will now play at the Volume level you selected.

NOTE: After doing the above, you will notice a small red dot between the first and second characters of the

Information Center Display. This indicates that your new value has not been saved to a Preset. For information

on how to save your settings to a Preset, see page 34.

6. To continue editing, instead of pressing the Hi “C” Pedal, use the PRESET/EDIT Switches

to select the parameter you want to edit. When you are finished editing, press the “Hi

C” Pedal once to return to PLAY Mode. All of your changes will now take effect.