SDS

Product Name Lithium Metal Cell
Revision date 21-Jan-2015
_____________________________________________________________________________________________
_____________________________________________________________________________________________
Page 3 / 7
Handle in accordance with good industrial hygiene and safety practice
Ensure adequate ventilation, especially in confined areas
Keep away from heat, sparks, flame and other sources of ignition
Do not eat, drink or smoke when using this product
Conditions for safe storage, including any incompatibilities
Keep containers tightly closed in a dry, cool and well-ventilated place
Keep away from heat
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Control parameters
Chemical Name
ACGIH TLV
OSHA PEL
NIOSH IDLH
Denmark
European Union
Pyrite (FeS2) (CAS #:
1309-36-0)
TWA: 1 mg/m
3
Fe
-
-
TWA: 1 mg/m
3
-
Aluminum (CAS #:
7429-90-5)
TWA: 1 mg/m
3
respirable fraction
TWA: 15 mg/m
3
total
dust
TWA: 5 mg/m
3
respirable fraction
(vacated) TWA: 15
mg/m
3
total dust
(vacated) TWA: 5
mg/m
3
respirable
fraction (vacated)
TWA: 5 mg/m
3
Al
Aluminum
TWA: 10 mg/m
3
total
dust
TWA: 5 mg/m
3
respirable dust TWA: 5
mg/m
3
Al
TWA: 5 mg/m
3
TWA: 2 mg/m
3
-
Chemical Name
Latvia
France
Finland
Germany
Italy
Aluminum (CAS #:
7429-90-5)
TWA: 2 mg/m
3
TWA: 10 mg/m
3
TWA: 5 mg/m
3
TWA: 1.5 mg/m
3
TWA: 4 mg/m
3
TWA: 1.5 mg/m
3
-
Chemical Name
Poland
Portugal
Spain
Switzerland
Netherlands
Aluminum (CAS #:
7429-90-5)
TWA: 2.5 mg/m
3
TWA: 1.2 mg/m
3
TWA: 10 mg/m
3
TWA:
5 mg/m
3
TWA: 10 mg/m
3
TWA:
5 mg/m
3
TWA: 3 mg/m
3
TWA: 0.05 mg/m
3
Chemical Name
Norway
United Kingdom
Australia
Austria
Belgium
Pyrite (FeS2) (CAS #:
1309-36-0)
-
-
1 mg/m
3
-
-
Aluminum (CAS #:
7429-90-5)
TWA: 5 mg/m
3
STEL: 10 mg/m
3
STEL: 30 mg/m
3
STEL: 12 mg/m
3
TWA: 10 mg/m
3
TWA: 4 mg/m
3
10 mg/m
3
5 mg/m
3
STEL 20 mg/m
3
TWA: 10 mg/m
3
-
Appropriate engineering controls
Ensure adequate ventilation, especially in confined areas
Remove all sources of ignition
Individual protection measures, such as personal protective equipment
Respiratory protection
If exposure limits are exceeded or irritation is experienced, NIOSH/MSHA
approved respiratory protection should be worn. Positive-pressure supplied air
respirators may be required for high airborne contaminant concentrations.
Respiratory protection must be provided in accordance with current local
regulations.
Hand Protection
No special technical protective measures are necessary.
Eye/face protection
No special technical protective measures are necessary.
Skin and body protection
Wear suitable protective clothing.
9. PHYSICAL AND CHEMICAL PROPERTIES
Information on basic physical and chemical properties
Appearance
Solid
Color
silver
Odor
Odorless