Installation Guide

5 HAMPTONBAY.COM

Please contact 1-877-527-0313 for further assistance.

Installation

Installing the mounting bar

Connecting the wires

□ Attach the mounting bar with preassembled screw (BB) to

the outlet box using the mounting screws (CC). Ensure the

preassembled screw points down from the outlet box.

□ Connect the “L” live wire from the light to the black live

wire from the main power supply. Connect the “N” neutral

wire from the light to the white neutral wire from the main

power supply. Connect the earth (ground) bare copper wire

from the light and the green earth (ground) wire from the

main power to the green screw on the mounting bar (BB).

□ Connect each wiring connection using wire connectors (AA)

and gently tuck all connections into the outlet box.

□ Fasten the canopy (A) and outlet box cover (GG) to the

mounting bar (BB) by inserting the canopy (A) through the

screw of the mounting bar (BB) and securing in place with

the nut (DD).

□ To adjust the fixture to your desired hanging length,

unscrew the nut on the canopy (A) and then shorten or

lengthen the fixture cords to the desired length. Ensure that

both cords are adjusted to the same length so that the

fixture hangs level.