Instructions / Assembly

5 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Installation
1
Preparing the mounting plate
□ Loosely thread the screws (CC) and the hex nuts (DD) onto
the round mounting plate (BB).
CC
CC
BB
DD
DD
2
Installing the mounting plate
□ Attach this assembly to the outlet box using the mounting
screws supplied with the outlet box (not provided). Tighten
securely.
□ You now need to adjust the screw length (CC) according to
the xture canopy depth.
□ Lift up the xture (A) and pass the screws (CC) through the
two mounting holes in the xture canopy. While holding the
xture (A) with one hand, thread the screws (CC) in or out
of the round mounting plate (BB) until 3/16 in. of threads
are showing. That should be enough to mount the xture
as instructed in step 4.
□ Next, take the xture down and tighten the hex nuts (DD)
up against the round mounting plate (BB). You now should
have the correct length of threads for mounting the xture.
BB
Junction box screws
(not included)
Junction box
3/16" [5 mm]
Canopy
Depth
Thread screws up &
down for adjustment
BB
Junction box
DD
CC
A