Use and Care Manual

6
Installation (continued)
3
Connecting the wires
□ Strip 3/8 in. of insulation from the electrical wire ends.
Using the wire nuts (AA), connect the WHITE xture wire
to the WHITE supply wire from the outlet box; connect
the BLACK xture wire to the BLACK supply wire from the
outlet box.
□ Connect the xture ground wire and supply ground wire
using a wire nut or by fastening to the ground screw
on the round mounting plate. Wrap the wire nuts (AA)
with electrical tape (not included). Push all of the wire
connections carefully into the outlet box.
AA
AA
4
Mounting the xture
□ Slide the mounting holes in the xture (A) over the screws
(CC) and using the cylinder nuts (EE), tighten the xture
against the mounting surface.
NOTE: The xture can be mounted up or down.
-OR-
EE
CC
5
Attaching the glass shades
□ Attach the glass shades (B) to the xture (A) using the
socket rings (C) to secure the glass shades modestly tight
to the xture.
A
B
C
6
Installing the light bulb
□ Thread the bulbs (not included) into the xture sockets.
□ Use medium base 60-watt MAX incandescent bulbs or 60-
watt equivalent SBCFL or SBLED bulbs.