Use and Care Manual

8
Care and Maintenance
WARNING: Before you perform any cleaning or
maintenance work, turn off the electricity at the main circuit
breaker panel.
□ Wipe the xture clean with a damp, soft cloth. Do not use any abrasive cleaners or cleaners that contain alcohol.
□ When replacing the bulbs, use medium base 75-watt MAX incandescent bulbs or 75-watt equivalent SBCFL or SBLED bulbs.
Troubleshooting
Problem Possible Causes Solution
The lights will not turn on. The bulb is burned out. Replace the light bulb.
The power is off. Ensure the power supply is turned on.
There is a faulty switch. Test or replace the switch.
There is a faulty wire connection. Check the wiring.
The fuse blows or the circuit breaker trips
when the light is turned on.
There are crossed wires or the power wire is
grounding out.
Discontinue use of the xture. Check the
wire connections or contact a qualied
electrician.